El Pacific V-GTX 1080Ti Transparente es un bloque de agua que cubre completamente la VGA ASUS ROG STRIX GTX 1080 Ti. Este bloque de agua posee una base de cobre, una construcción de aletas internas, y una placa de aleación de aluminio manufacturado con una máquina de control numérico. Este bloque de agua encaja perfectamente con la mayoría de racores G1/4, y su instalación no requiere herramientas, por no hablar de la gran compatibilidad que ofrece a los modders. El Pacific V-GTX 1080 Ti transparente proporciona el rendimiento en la refrigeración definitivo para el gaming, overclocking u otras tareas intensas para la GPU.
El Certificado TT LCS es una certificación exclusiva de Thermaltake, aplicada solo a los productos que pasan unos estándares muy altos de diseño y aprobación por los más apasionados, siendo así merecedor de considerarse un verdadero chasis LCS. La certificación tt LCS fue creada para que nosotros, como asesores, pudiéramos aconsejar a los usuarios potenciales sobre qué chasis ha sido probado para ser el mejor y más compatible con configuraciones de refrigeración líquida, para asegurarles los mejores resultados conseguidos por parte de las mejores características y accesorios.
Manufacturado siguiendo los estándares más altos de Thermaltake, la base de cobre mecanizada posee un acabado en espejo con una capa anticorrosiva que encaja con la superficie de la CPU, proporcionando una transferencia de calor excepcional para así estar a la altura de las condiciones más exigentes.
El paso del flujo del refrigerante pasa por todos los componentes críticos. La correcta refrigeración de estos componentes contribuye a un overclocking estable y un funcionamiento fiable. El bloque cubre todo el PCB, sin dejar componentes expuestos a posibles daños durante el manejo.
Con un factor de forma compacto de micro-canal 0.5mm, y una construcción de finas aletas, se garantiza una disipación de calor extrema. La base de cobre es compatible con la mayoría de racores G1/4.
Para prevenir deformaciones en la PCB, una placa de aleación de aluminio ha sido incluida en el paquete. Esta placa posee un grosor de 4 mm y puede cubrir toda la parte trasera de la GPU.
Diseñado para encajar en una ASUS ROG STRIX GTX 1080 Ti con un mecanismo de montaje universal, la Pacific V-GTX 1080 ti transparente permite a los entusiastas configurar sus sistemas de refrigeración líquida con una gran estética, además de poder incorporar mejoras externas modulares en el futuro.
*Compatible with most SLI bridges
TT RGB PLUS Software
2.0 - New version of Thermaltake’s TT RGB PLUS patented software, providing more lighting effects and PC monitoring functions.
1.0 - Thermaltake’s patented software to synchronize TT RGB PLUS products with addressable LEDs.
Caution: TT RGB PLUS 2.0 and TT RGB PLUS 1.0 will overwrite one another; users can only install one version of TT RGB PLUS.
2.0 DOWNLOAD NOW
2.0 USER MANUAL
1.0 DOWNLOAD NOW
LEARN MORE
Software TT RGB PLUS 2.0
La nueva versión del software patentado TT RGB PLUS de Thermaltake proporciona más efectos de iluminación y funciones de monitorización del equipo.
Precaución:
TT RGB PLUS 2.0 y TT RGB PLUS 1.0 se sobrescribirán entre sí; los usuarios sólo pueden instalar una versión de TT RGB PLUS.
Sync with Razer Chroma Lighting
All Thermaltake TT RGB PLUS products are able to connect into the Razer Chroma ecosystem, Razer Synapse 3. Users can experience synchronized gaming and RGB lighting effects on their TT RGB PLUS liquid cooling system and Razer gaming gear!
Works with Amazon Alexa
All Thermaltake TT RGB PLUS products support Amazon Alexa Voice Service, allowing you to give voice commands to the Alexa-enabled devices.
Cautions
Thermaltake recommends the following steps to be taken
before using
the
Pacific series radiators and water blocks
- To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
- Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
- It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while protecting the entire liquid loop from corrosion.
- Before storing your water cooling components, please clean, rinse and dry. This will ensure a longer lifespan for your components.
Thermaltake recommends the following steps to be taken after completing your water loop
setup
- It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.
- Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.
- DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately
- Fill the reservoir to the top as it will prevent air from going into the pump
- If necessary tilt the system slightly from side to side to bleed the air out of the loop.
- Place some paper towels under fittings and joining points to test for leaks.
- Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop.
- Before starting, flush out your system correctly to prevent any coolant or unwanted particles sticking to your tubes, radiators and other cooling components.
- Coolant might fade over time.
P/N | CL-W184-CU00TR-A |
---|---|
Dimensions | 19.4 H x 117.3 W x 260 L mm |
Peso | 1340 g |
Compatibility | ASUS ROG STRIX GTX1080Ti |
Material | Copper + Acrylic |
Threads | G ¼” |
User Manual
- Nombre de archivo
- Descripción
- Tamaño
- Version
- Release Date