Search
Búsqueda avanzada
Mi cesta 0
Coolant 1000 Red Coolant 1000 Red
Coolant 1000 Red

Coolant 1000 Red

No está disponible
P/N
CL-W020-OS00RE-A
15,99 € (included VAT)

Pre-mixed red coolant (1000 ml) for custom PC water cooling configurations

Thermaltake Coolant 1000 Red
The Thermaltake Coolant 1000 Series was formulated with the perfect combination of cooling performance and anti-corrosive protection. Premixed with no need for additional additives, this high performance coolant protects each component while providing optimal flow throughout the system.

The Coolant 1000 is made in Taiwan, and available in various colors: Green, Red and Blue with 2-year shelf-life; brighten up any build with Thermaltake.
 
“Tt LCS Certified” is the hallmark that ensures first-class performance from the best features and fitment. A certification exclusive to Thermaltake, it sets the benchmark for all true LCS chassis and is applied only to products that meet our stringent design standards for delivering what hardcore enthusiasts demand. The Tt LCS certification is a way for Thermaltake to designate to all power users the chassis which have been tested for best compatibility with extreme liquid cooling configurations.
 


Eco-friendly Anti-corrosive Solution
Being non-toxic and non-flammable, the Coolant 1000 is an eco-friendly pre-mix solution with 2 years shelf life, providing great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion. In addition, users can easily refill by using the refill bottle.

- Boiling Point: 210.2℉ (99℃)

- Freezing Point: -4℉ (-20℃) Composition of Coolant 1000 as below:


Refill Bottle as below:

 
Easy Application
Thermaltake Coolant 1000 is designed specifically for PC liquid cooling systems. The features of the Coolant 1000 include anti-freezing, anti-rusting, and water scale prevention. This coolant can reduce the temperature of the system effectively and further enhance the thermal efficiency.
 

Caution:
May be harmful if swallowed, may cause birth defects. May cause respiratory tract, eye and skin irritations. Keep out of reach of children. Avoid breathing any vapors or spray mists. Use with adequate ventilation. Avoid contact with skin and eyes. Keep container tightly closed when not in use. Wash thoroughly after handing. Store in a cool place.


Thermaltake recommends the following steps to be taken after completing your water loop setup
  1. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.
  2. Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.
  3. DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately
  4. Fill the reservoir to the top as it will prevent air from going into the pump
  5. If necessary tilt the system slightly from side to side to bleed the air out of the loop.
  6. Place some paper towels under fittings and joining points to test for leaks.
  7. Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop
  8. Before starting, flush out your system correctly to prevent any coolant or unwanted particles sticking to your tubes, radiators and other cooling components.
  9. Coolant might fade over time.

Cautions

Thermaltake recommends the following steps to be taken before using the Pacific series radiators and water blocks:

  • To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
  • Do not use tap water or distilled water as your coolant; it may harm your loop and reduce performance.
  • It is strongly recommended to use market-proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while protecting the entire liquid loop from corrosion.
  • Before storing your water cooling components, please clean, rinse, and dry them to ensure a longer lifespan for your components.

Thermaltake recommends the following steps to be taken after completing your water loop setup:

  • It is strongly recommended to use market-proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing corrosion in the entire cooling system – copper, brass, nickel, aluminum, and steel.
  • Fill the reservoir with coolant and cycle the power on and off several times while the pump pushes the coolant into the loop.
  • DO NOT let the pump run dry; turn off the power immediately if there is no liquid entering the pump.
  • Fill the reservoir to the top to prevent air from entering the pump.
  • If necessary, tilt the system slightly from side to side to bleed air out of the loop.
  • Place some paper towels under fittings and joining points to check for leaks.
  • Run the loop with the fill port open for about 24 hours to completely bleed air out of the loop.
  • Before starting, flush your system correctly to prevent any coolant or unwanted particles from sticking to your tubes, radiators, and other cooling components.
  • Note that coolant might fade over time.
Más Información
P/N CL-W020-OS00RE-A
Major Material / Major Material Ingredient Water~94%
Propylene Glycol ~6%
Other materials:
1。Ethylene diamine tetra acetate detetrasodium (ED .TA.4Na)0.1%
2。Methy paraben (M.P) 0.1%
3。 Color pigment 0.002%
Capacity 1000 ml
Color Red